Delta Tau ADVANTAGE 900 BASIC PACKAGE Manuel d'utilisateur télécharger pdf (Page 36)

Advantage 900 Remote Operator Pendant

CONNECTOR DESCRIPTIONS

At this time, a “Welcome to the Found New Hardware Wizard” dialog box should appear if the

unit has not been plugged in to a USB port previously. Follow the on-screen instructions and pay

attention to the following:

1) Do not

allow Windows to connect to Windows Update.

2) Allow Windows to Install the Software Automatically.

3) Choose Continue Anyway when prompted about Windows Logo Testing.

Step 7

At this time you may close the Simply Blue Commander application and open the Delta Tau

Configure Ethernet 100Base T application located in the Windows Start Menu as follows:

Start -> All Programs -> PMAC Executive Pro2 Suite -> Delta Tau Common

Step 8

Enter the Gateway IP by using the first 4 converted hexadecimal values as shown below. Enter

the Gateway Mask by using the last 2 converted hexadecimal values. Set the third address to 0

and the last to 1 as shown below.

Click on the Gateway IP and Gateway Mask buttons to complete the programming.

1 2 ... 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

Delta Tau ADVANTAGE 900 BASIC PACKAGE Manuel d'utilisateur Page 36